ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Change Table...
1
Lay one end panel on its side and place the
bottom shelf in position.
Ensure the shelf correctly fits into the groove on
the headboard.
Secure with two x 45mm bolts.
1a.
1b.
1c.
DO NOT OVER TIGHTEN BOLTS. OVER TIGHTENING BOLTS CAN CAUSE PANELS TO CRACK.
WARNING
To attach Top Rail...
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the change table is
assembled.
Identify all parts and components.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the change table is not scratched during assembly.
a.
b.
c.
d.
1
2
Select either the Flat Top Rail or the Arch Top
Rail to be attached.
Store other top rail.
Place selected top rail on top of end panel.
Screw two cam lock pins into top rail.
Insert top rail into top of headboard
Insert two cam locks and turn clockwise to secure.
1a.
1b.
1c.
1d.
2a.
2b.
PLEASE NOTE!
Previous steps under ‘To attach Top Rails’ apply to both Flat Top Rail
and Arch Top Rail.
