Beast RS34, Руководство по эксплуатации

Страница: 6 / 16

®
RS34 - RS48 - RS59
6
BEAST BRIDGE SAWS OPERATING MANUAL
• KEEP AWAY FROM MOVING PARTS
It is important to keep hands,
feet, hair and clothing away from
all moving parts to prevent injury.
It is also important to be sure that
covers and guards are always
in their proper position. If not,
serious injury can occur.
• DO NOT REMOVE BLADE GUARD
It is important that all machine
guards remain in place and in
proper working condition. This is
to prevent serious injury, death or
damage to the equipment.
WARNING: The use of saws and
drills generates dust. Excessive
airborne particles may cause
irritation to eyes, skin and the
respiratory tract. To avoid
breathing impairment, always us
dust controls and protection suit-
able to the material being sawed
or drilled;
See OSHA (19 CFR Part 1910.1200).
Diamond Blades improperly used are
dangerous. Comply with American
National Standards Institute Safety Code,
B7.1 and, Occupational Safety and
Health Act covering speed, Safety Guards,
Flanges, Mounting Procedures, General
Operating Rules, Handling, Storage and
General Machine Conditions.
California Proposition 65 Mes-
sage
Some dust created by power sanding,
sawing, grinding and other construction
activities contain chemicals known [to the
State of California] to cause cancer, birth
defects or other reproductive harm. Some
examples of these chemicals are:
• Lead, from lead-based paints
• Crystalline silica, from bricks and
cement and other masonry products
• Arsenic and chromium, from chemically
treated lumber
For further information, consult the
following sources:
http://www.osha-slc.gov/sltc/
sillicarystalline/index.html
http://www.oehha.org/prop65/out_of_
date/6022kLstA.html
Your risk from these exposures varies
depending on how often you do this type
of work. To reduce your exposure to these
chemicals, work in a well-ventilated area,
and work with approved safety equipment,
such as dust masks that are specially
designed to filter out microscopic particles.
Electrical Requirements and
Grounding Instructions
In order to prevent potential electrical
shock and injury, the following electrical
safety precautions and symbols should be
followed at all times!
WARNING: In case of a mal-
function or breakdown, ground-
ing provides a path of least
resistance for electric current to
reduce the risk of electric shock.
This tool is equipped with an
electric cord having an equip-
ment-grounding conductor and a
grounding plug. The plug must
be plugged into a matching out-
let that is properly installed and
grounded in accordance with all
local codes and ordinances.
• Do not modify the plug provided –
if it will not fit the outlet; have the
proper outlet installed by a qualified
electrician.
• Improper connections of the equipment
grounding conductor can result in a