BEAR | 2017 |
page 8
Figure 1. The design of the BEAR A 1104, BEAR A 1110, BEAR A 1125 electric water
distillers, where:
1 – Housing
2 – Evaporator
3 – Steam flow splitter
4 – Flow rate limitation nozzle
5 – Steam movement channel
6 – Condenser chamber
7 – Equalizer
8 – Evaporator drain pipe
9 – Evaporator low level sensor
10 – Low-water thermostat sensor
11 – Distillate level sensor
13 – Electric circuit components
14 – Flow rate limitation nozzle
15 – Heat exchanger inlet
16 – Evaporator inlet
17 – Heater
18 – Equalizer drain pipe
19 – Heat exchanger
20 – Condenser drain pipe
21 – Raw water supply valve
22 – Collector distillate level pipe
23 – Evaporator top level sensor
24 – Equalizer level sensor
Figure 2. Fitting / grounding terminal connection diagram for the BEAR B 1104, BEAR B
1110, BEAR B 1125 electric water distillers, where:
25 – Raw water supply valve fitting
26 – Cooling water drain fitting
27 – Evaporator water drain tap fitting
28 – Distillate drain tap
29 – Grounding terminal
30 – Thermal overload reset switch
The water distiller electric circuit components 13 are located in the base bottom part.
