BE&SCO Beta 900 Tortilla Oven, Руководство пользователя

Страница: 20 / 95

20
Control Panel
Flour Tortilla Section
8. The
Heat Switch
is a red mushroom-head button that turns on the electrical power to
the MIDWEDGE. Pull the switch to turn power ON and push to turn power OFF to the
MIDWEDGE.
9. The Temperature Controller controls the temperature for the MIDWEDGE bottom
plate. To adjust the set point temperature press the function (“FuNC”) key once and
the letters “SP” will appear in the lower display window. Then press the down or up
arrow to change the temperature. When the temperature is set, press the function
key again and wait until the “SP” letters disappear from the display window. Your
temperature has been adjusted.
Note: Pressing the function key repeatedly will scroll the controller through a variety of
readings in “SP” mode. “SP” is the adjustable mode. Other mode settings are preset
at the factory and can only be accessed by an authorized service technician.
10. The
Press Motor
button turns power to the MIDWEDGE on and off. Push to turn on
and Push to turn off power.
11. The Hour Meter counts time in tenths of hours while the MIDWEDGE is in operation.
12. The
Motor Fuse
protects the MIDWEDGE motor from a power overload.
13. The Press Speed knob adjusts the speed at which the motor raises and lowers the
bottom plate and the rate the hopper gate opens and closes.
DLT & Palm Sander Section
14. The DLT & Palm Sander (outlet use only) is solely for plugging in your sander to clean
the round plates.