Beam Terra 800, Инструкция по установке и эксплуатации

Страница: 39 / 68

BEAM Terra 800 - Installation & User Manual 39
Activating and de-activating fixed
number dialling
Select Menu > Settings > Security, highlight
Fixed dialling from the list and press the centre
selection key. Select On to activate and press
the centre selection key or OK. You will be
prompted to enter your PIN 2 code. The default
PIN 2 is 9999. See “Setting up SIM PIN 2 code”
on page 55 for more information. Contact your
service provider if this code was not specified or
was reset at purchase.
To add a number to your list, select Menu
> Contacts > FND list and press the centre
selection key. Press Options and select either
New FND contact or Copy from phonebook.
You will then be prompted for the PIN 2 code.
FND list entries are stored on your SIM card.
Only one name and one contact number can be
stored for each entry.
Fixed number dialling can restrict your Terminal
to a certain prefix, as well as individual phone
numbers. To limit outbound calls or text
messages to a specific country or range of
corporate numbers, create an FND list entry
with the international prefix and local prefix you
Using fixed number dialling
Select Menu > Contacts > FND list and the contact.
Select Call or Send message from Options.
To send email messages when fixed number
dialling is activated, the message centre number
should be added to the FND list. See “Message
settings” on page 44 for more information on
finding your message centre number.
NOTE
Fixed number dialling, Call barring and
Call divert does not prevent emergency calling.
wish to allow, followed by the correct number
of remaining digits replaced by question marks
Press the * key twice to enter a question mark.
Example: To limit calls to UK landlines, create an
FND list entry: +44??????????. Substitute any
number in place of the ? symbols while dialling
or sending a message.
When fixed number dialling is activated, your
Terminal still enables numbers stored in other
areas of Contacts to be viewed.