RST100
USER
&
INSTALLATION
MANUAL
17
Installing RST100
This chapter explains how to install the RST100 and the Iridium fixed-mast antenna.
Warning:
Make sure the RST100 is switched off before you install the
cables. If you do not, the RST100 may be damaged.
Note:
Before you install the RST100, determine if the unit is preconfigured
or needs customer configuration.
Mounting the RST100
The RST100 comes with two (2) standard right angle mounting brackets that allow
mounting for mobile and fixed positioning.
Note:
To ensure sturdy mount attachment:
1. Mount the RST100 on a clean, even surface.
2. Clean the mount surface of the RST100.
3. Use the correct type of screws.
4. If mounting on a wooden surface, m
ake sure the wood is
structurally sound.
5.
Leave enough room around the RST100 to allow unhindered
access to the rear panel.
6.
Do not install the unit in a permanently concealed recess. You
should be able to access and remove the unit should future
service be required.
