Beam IsatDock MARINE, Руководство пользователя

Страница: 20 / 36

20
5) Connect RJ11/POTS Interface
Any standard analogue POTS (= P lain O ld
T
elephone
S
ervice) Telephone is supported by
the IsatDock MARINE. It supplies power to the
analogue phone as well as ring, dial and busy tones.
The analogue phone can be connected by up to
600m of cabling to the IsatDock MARINE.
RJ11 port
See section 4 on page 19
6) Connect Alert Loop (optional)
IsatDock MARINE provides a standard
Beam alert loop. This provides a Normally CLOSED
wire loop, which can be used to connect to any
passive type of button, relay, or reed switch
in which the action breaks the loop (OPEN) to
activate the alert state.
Connect the alarm cable directly to the alert
loop connection. The cable can be extended to
long runs up to 45 meters. This alert loop can
support multiple alert buttons / switches wired
in SERIES, whereby any one of these will OPEN
(activate) the loop when pressed. This provides
the same functionality as pressing the mute and
track button on the dock and manually placing
the unit into alert/emergency mode.
Alert loop connection
See section 4 on page 19
7) USB Port Connection
IsatDock MARINE has a micro USB Data Port
programming interface to enable upgrading of
the Docking station firmware.
USB Data Port
See section 4 on page 19
NOTE
Data services scheduled to be available Q1 2011.