Beam IsatDock MARINE, Руководство пользователя

Страница: 28 / 36

28
IsatDock Key lock
A barrel type lock is situated in the top of the
dock. When locked, the eject button cannot
be depressed and the IsatPhone Pro cannot be
removed from the dock. Once locked, the access
to the security bolt beneath the handset is also
denied thus ensuring the MARINE docking station
cannot be removed from the mounting bracket.
To manually send a tracking message of the
current location
A. Apply a single press to the Track button.
A single beep will sound (if configured
in the IDMS).
Activate Alert Mode
Alert mode can be activated by one of the
following two methods:
1.
Press and hold both the Track and Mute
buttons together for 2 seconds. A single
beep will sound (if configured in the IDMS).
2. If enabled by the IDMS, press and hold the
external panic button (optionally wired
into the Alert Loop wires).
Once triggered
into the Alert mode, the Track
LED turns RED. The message then attempts to
be sent. The Track LED will flash in RED when the
alert message is sent. (Rate: 1.5sec off, 1.5sec on,
etc). The Track LED will flash in YELLOW when
the alert message is acknowledged by a remote
host. (Rate: 1sec off, 4sec on, etc)
Clearing an Alert
To clear the alert mode press and hold the Track
button for seven seconds. A single beep will sound,
and the LED will show re-armed state (GREEN).
Tracking and Alert Operations
Enable Tracking & Alert
The Tracking & Alert function is
NOT
enabled by
default and it has to be configured and enabled
using the IDMS software via the micro-USB
connection to the IsatDock MARINE.
Various configuration options are available
to the user in the IDMS. The message delivery
method is also set using the IDMS. Please refer
to the IDMS User Guide for more details on how
to configure and enable the Tracking & Alert
function on the IsatPhone Pro.
Send Tracking Position
In order to send a tracking message, the
following conditions must be fulfilled.
1.
The GPS receiver has acquired enough
satellite signals and navigational data to
calculate a positional solution (fix).
2. The IsatPhone Pro handset is registered
with the GSPS network.
3. Tracking is configured and enabled via
the IDMS.
The Track LED will stay off if the Tracking function is
disabled. It will turn solid GREEN if all of the above
conditions are satisfied. Otherwise, it will flash in
GREEN if the Tracking function is enabled but no
GPS fix and/or GSPS registration has occured.
Locked
Open