IntelliDOCK 9555 Installation & User Manual
27
Due to the increased heating effects of the phone whilst it is docked
and in charging mode, it is ideal for the ambient temperature to be
approximately 10 degrees below this for the handset to charge the
battery whilst docked. If the battery temperature exceeds this limit, then
the Iridium 9555 battery may cease charging until the temperature is
reduced, or may undergo the power charging process as stated above.
A Bluetooth® Phone Call - Mobile Originating
A Bluetooth® call can be started by using the 9555 keypad.
1. The Bluetooth® connection to the Audio Headset is required [check
the Bluetooth®
LED is on,
blue
- half intensity].
Dial (using the full country codes) on the 9555 keypad. The
message appears on 9555:
“Call In Progress”
. Audio is
automatically sent to the Bluetooth® Headset.
During call, the Bluetooth®
LED will flash
blue
slowly.
2. To end call, use the 9555 keypad.
Options:
1. During call, you may transfer the call to the optional “Privacy
Handset” by taking the Privacy Handset out of its cup. This
automatically directs the call audio to the Privacy Handset. To
return call back to the Bluetooth® Headset, insert the Privacy
Handset back in its cup.
Bluetooth® Phone Call – Mobile Terminating
The Bluetooth® connection to the Audio Headset is required
[check the Bluetooth®
LED is on,
Blue
- half intensity].
1. Answer the incoming call by:
♦
Press the Bluetooth® headset answer button,
OR:
♦
Press answer button on the 9555 keypad.
2. To end call:
♦
Press the Bluetooth® headset answer button,
OR:
♦
Press End Call button on the 9555 keypad.
Privacy Handset Use
The Beam Privacy Handset (RST755) is ordered separately.
The Privacy Handset mode is enabled when the handset is removed
from the cup. Please re-dock the Privacy Handset when not in use.
When the handset is out of its cup, it then has priority and audio is
directed to this handset.
If the Bluetooth® Headset is NOT used, then this Privacy Handset can
be used on its own.
