IntelliDOCK 9555 Installation & User Manual
23
Bluetooth® Configuration (optional)
IntelliDOCK has an in-built Bluetooth® module for voice and data con-
nectivity. The Factory Default power mode is Class 2 (> 10 metres) low
power. If you require Class 1 (>100 metres) high power, this can be
selected in the PDMS settings.
Bluetooth® Headset Configuration
To configure (pair) to a Bluetooth® headset (audio) device:
1. Power up the IntelliDOCK system, to ready state.
2. Discovery Mode:
Press and hold for 5 secs
the Bluetooth®
button on the cradle, until the cradle sounds a double (2)
beeps. The LED will then flash
Blue
and
Orange
until the audio
device is paired.
3. Hold the Headset (device) button(s) to enter pairing mode (please
refer to the headset user instructions)
4. Once the devices are successfully paired, the Bluetooth® LED on
the cradle will change to
Blue
(half intensity).
5. Bluetooth® can be turned ON with a
single press
, and OFF by
press and hold for 2 secs
the Bluetooth®
button on the
cradle. The cradle will sound a single (1) beep when turning off.
Once paired, the IntelliDOCK will automatically connect to this device
every time the IntelliDOCK powers up.
You may repeat this process to pair more than one headset (up to 17
total devices including data) – ensure only one device is switched on
during subsequent paring configuration.
NOTE:
To clear all paired devices from IntelliDOCK memory,
Press and
hold for 10 secs
the Bluetooth®
button on the cradle, until the
cradle sounds a triple (3) beeps.
