background image

1-Year Limited Warranty

Territory: United States/Canada 

LIMITED WARRANTY TO ORIGINAL CONSUMER 

This product (including any accessories included in the original packaging) 

as supplied and distributed new by an authorized retailer is warranted 

by Southern Telecom, Inc. to the original consumer purchaser against 

defects in materials and workmanship (“Warranty”) as follows:

To obtain warranty service:

• Visit our website at www.southerntelecom.com

• Click on Product Support

• Select the Brand of your device

• Select Service Request and fill out the form to begin your inquiry

Your product will be repaired or replaced, at our option, for the same 

or similar model of equal value if examination by the service center 

determines this product is defective. Products received damaged as a 

result of shipping will require you to file a claim with the carrier.

Warranty service not provided

This warranty does not cover damage resulting from accident, misuse, 

abuse, improper installation or operation, lack of reasonable care, 

unauthorized modification including software modifications such as the 

installation of custom firmware. This warranty is voided in the event 

any unauthorized person opens, alters or repairs this product. All products 

being returned to the authorized service center for repair must be 

suitably packaged.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT 

LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY 

DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS 

ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED 

ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY 

PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE 

BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE 

ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION - 

ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL 

DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, 

DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES 

(SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, 

BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE 

OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO 

OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, 

CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED 

THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS 

WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE 

ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT 

TRANSFERABLE. 

Some countries, states or provinces do not allow the exclusion or limitation 

of incidental or consequential damages or allow limitations on warranties, 

so limitation or exclusions may not apply to you. This warranty gives 

you specific legal rights, and you may have other rights that vary from 

state to state or province to province. Contact your authorized retailer 

to determine if another warranty applies.

©2019 Southern Telecom, Inc. 

Beam is a trademark of Southern Telecom, Inc. All Rights Reserved.

MADE IN CHINA

LIMITED WARRANTY

25

Содержание i580




























Отзывы: