When all else fails, this method is the surefire way to get all the buttons
of your original remote working on the Beam! It’s also a great way to
improve one of the codes programmed using the app or code list
methods. Below, are the steps to “copy” buttons from your original
remote to the Beam remote.
NOTE:
This programming method requires your device’s original remote.
3. Enter “8888”, and you will hear a short beep that indicates the Beam
remote is ready to receive a signal from your original remote.
OPTION 3. PROGRAMMING MANUALLY
DEVICE
CATEGORIES
1. Press and hold the
PROGRAM
button of the Beam remote until the
POWER
button lights up.
2. Select the device you want to program from the
DEVICE CATEGORIES
,
the
POWER
button blinks once.
09
