H E A D E R
6
0178-1737-000 Rev. A
4/OPERATOR MAINTENANCE
4.1 Repair Policy
Note:
Service, other than what is described in this manu-
al, must be performed by a “Technically Competent” indi-
vidual as described in the Service Manual for this product.
Do not use malfunctioning equipment. Make all neces-
sary repairs, or have the equipment serviced by an
Authorized BeaconMedæs Service Representative. After
repair, test the equipment to ensure that it is functioning
properly, in accordance with the manufacturer’s published
specifications .
To ensure full reliability, have all repairs and service done
by an Authorized BeaconMedæs Service Representative.
If this cannot be done, replacement and maintenance of
those parts listed in this manual may be undertaken by a
competent, trained individual having experience in the
repair of devices of this nature.
CAUTION: No repair should ever be undertaken or
attempted by anyone not having general experience
in the repair of devices of this nature.
Replace damaged parts with components manufactured or
sold by BeaconMedæs. Then test the unit to ascertain that it
complies with the manufacturer's published specifications.
Contact BeaconMedæs Technical Support for service
assistance. In all cases, other than where
BeaconMedæs’s warranty is applicable, repairs will be
made at BeaconMedæs’s current list price for the replace-
ment part(s) plus a reasonable labor charge.
4.2 General Maintenance
The alarm panel is designed to provide extended service life
with a minimum of maintenance. All of the indicators use
light emitting diodes (LEDs). Once a month, test these
indicators and the electronics by pressing the TEST
switch (Figure 5). If the alarm tone does not sound, or if
an indicator does not light up, have the panel repaired by
a qualified service person. The indicator lights are not
intended to be replaced by the operator. Once a year
have a qualified service person verify the accuracy of the
alarm trigger points.
Keep the panel clean by wiping it off with a soft, dry
cloth. Do not scrub the panel with abrasive or liquid
cleansers, or with liquid sterilizing agents.
WARNING: Do not use liquid cleaning solutions on
this unit. Liquid solutions may enter the unit and
cause system damage or present an electric shock
hazard.
Figure 5
Controls and Indicators
