Beaba THERMOSPEED JPD-FR412, Инструкция по эксплуатации

Страница: 13 / 14

where p is the maxi-
mum output power
rating of the transmitter
in watts (W) according
to the transmitter
manufacturer and d
is the recommended
separation distance in
metres (m).
Field strengths from
fixed RF transmitters, as
determined by an
Electromagnetic a site
survey,a should be less
than the compliance
level in each frequency
range.b
Interference may occur
in the vicinity of equip-
ment marked with the
following symbol:
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic is
affected by absorption and reflection from structures, objects and people.
a. Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio, AM
and FM radio broadcast and TV broadcast cannot be predicted theore-
tically with accuracy. To assess the electromagnetic environment due to
fixed RF transmitters, an electromagnetic site survey should be conside-
red. If the measured field strength in the location in which the JPD-FR412
is used exceeds the applicable RF compliance level above, the JPD-FR412
should be observed to verify normal operation. If abnormal performance
is observed, additional measures may be necessary, such as re-orienting
or relocating the JPD-FR412.
b. Over the frequency range 150 kHz to 80 MHz, field strengths should be
less than 3 V/m.
Recommended separation distances between portable and mobile
RF communications equipment and the EQUIPMENT or SYSTEM -for
EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
The Infrared Thermometer JPD-FR412 is intended for use in an electro-
magnetic environment in which radiated RF disturbances are controlled.
The customer or the user of the Infrared Thermometer JPD-FR412 can help
prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters)
and the Infrared Thermometer JPD-FR412 as recommended below, accor-
ding to the maximum output power of the communications equipment.
Rated maxi-
mum
output power
of transmitter
W
Separation distance according to frequency of transmitter
80 MHz to 800 MHz 800 MHz to 2.5 GHz
0.01 0.12 0.23
0.1 0.38 0.73
1 1.2 2.3
10 3.8 7.3
100 12 23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in metres (m) can be estimated
using the equation applicable to the frequency of the transmitter, where
P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
d= P 80 MHz to 800 MHz
3.5
[
[
E.
1
d= P 800 MHz to 2.5 GHz
7
[
[
E.
1
Medical Device Vigilance :
Any incident or potential serious incident has to be notified to the
manufacturer and to the competent authority of the country involved.
Warranty and After-Sale Service
The device is under warranty for one year from the date of purchase.
The batteries, the packaging, and any damage caused by improper use are not
covered by the warranty.
Excluding the following user-caused failures:
1. Failure resulting from unauthorized disassembly and modification.
2. Failure resulting from an unexpected dropping during application or
transportation.
3. Failure resulting from not following the instructions in the user’s manual.
Authorized European Representative:
Wellkang Ltd
Suite B, 29 Harley Street, London W1G 9QR,UK
EC REO