![BEA IXIO-DT1 Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/bea/ixio-dt1/ixio-dt1_manual_2715840007.webp)
Page 7 of 9
75.5751.11 IXIO-DT1 UL 20180305
TROUBLESHOOTING
ORANGE LED flashes
1x.
The sensor signals an
internal fault.
Replace sensor.
ORANGE LED flashes
2x.
The power supply voltage
is too low/high.
Check power supply voltage in diagnotistics
menu (menu 3) of the LCD.
Check wiring.
ORANGE LED flashes
4x.
The sensor does not receive
enough AIR-energy.
Decrease the angle of the AIR-curtains.
Increase the AIR-immunity filter.
Deactivate 1 curtain.
ORANGE LED flashes
5x.
The sensor receives too
much AIR-energy.
Slightly increase the angle of the AIR-curtains.
Decrease the AIR-immunity filter.
The sensor is distrubed by
external elements.
Eliminate the cause of disturbance (lamps,
rain cover, door controller housing properly
grounded).
ORANGE LED flashes
8x.
IR power emitter is faulty.
Replace sensor.
ORANGE LED is on.
The sensor encounters a
memory problem.
Cut and restore power supply.
If ORANGE LED illuminates again, replace the
sensor.
RED LED flashes quickly
after an assissted
set-up
The sensor sees the door
during assissted set-up.
Move the AIR-curtains away from the door.
Install the sensor as close to the door as
possible. If needed, use a bracket assembly.
Ensure that the bottom of the sensor is
mounted within 2” of the bottom of the door
header.
Launch a new assisted set-up.
RED LED illuminates
sporadically.
The sensor vibrates.
Check if the sensor is fastened firmly.
Check position of cable and cover.
The sensor sees the door.
Adjust the IR angle and launch an assisted
set-up.
The sensor is disturbed by
external conditions.
Increase the AIR-immunity filter.
GREEN LED illuminates
sporadically.
The sensor is disturbed by
rain and/or leaves.
Increase radar-immunity filter.
Ghosting created by door
movement.
Change radar filed angle.
The sensor vibrates.
Check if the sensor and door cover is fastened
firmly.
Check position of cable and cover.
The sensor sees the door or
other moving objects.
Remove the objects if possible.
Change radar field size or angle.
troubleshooting continues on the next page
2
1
4
5
8
E1
E2
E4
E5
E8