Page 6 of 9
75.5751.11 IXIO-DT1 UL 20180305
+
+
DeEner/NO
Energ/NC
Energ/NC
Energ/NC
Energ/NC
DeEner/NO
DeEner/NO
DeEner/NO
DeEner/NO
Energ/NC
DeEner/NO
Energ/NC
Energ/NC
Energ/NC
Energ/NC
Energ/NC
Energ/NC
DeEner/NO
Energ/NC
DeEner/NO
DeEner/NO
DeEner/NO
DeEner/NO
DeEner/NO
Back
More
RAD: FIELDSIZE
RAD: IMMUNITY
RAD: DIRECTION
RAD: HOLDTIME
RAD: REENTRY
RAD: OUTPUT
AIR: IMMUNITY
AIR: WIDTH
AIR: NUMBER
AIR: PRESENCE TIME
AIR: FREQ
AIR: OUTPUT
TEST
REDIRECTION
FACTORY RESET
More
Back
OVERVIEW OF SETTINGS
Back
More
RAD: FIELDSIZE
AIR: WIDTH
AIR: OUTPUT
TEST
More
Back
ZIP CODE
all parameter settings in zipped format
(see application note on ZIP CODE
–
76.0024)
ID #
unique ID-number
CONFIG P/N
SOFT P/N
ERROR LOG
last 10 day indication
AIR: SPOTVIEW
view of spot(s) that trigger detection
AIR: C1 ENERG
signal amplitude received on curtain 1
AIR: C2 ENERG
signal amplitude received on curtain 2
POWERSUPPLY
supply voltage at power connector
OPERATINGTIME
power duration since first startup
RESET LOG
delete all saved errors
PASSWORD
LCD and remote control password
(0000= no password)
ADMIN
enter code to access admin mode
opening output is active in case of:
0 motion detection
1 motion
or
presence detection
2 motion
and
presence detection
min. value for DIN18650: 1 min
min. value for EN16005: 30 s
BASIC
ADV
ANCED
DIAGNOSTICS
partial: outputs are not reset
factory value
Always additionally adjust the
arrow position on the sensor with a
screwdriver.
Always additionally adjust the
arrow position on the sensor with a
screwdriver.
small
small
small
normal
0.5 s
DeEner: De-Energized relay
Energ: Energized relay
NO: normally open
NC: normally closed
DeEner: De-Energized relay
Energ: Energized relay
NO: normally open
NC: normally closed
DeEner: De-Energized relay
Energ: Energized relay
NO: normally open
NC: normally closed
>
>
>
8 s
60 min
full
reset
>
large
large
large
9 s
infinte
partial
reset
high
>
>
>
6 s
10 min
>
>
>
>
mode B
7 s
20 min
>
>
>
>
5 s
5 min
>
>
>
>
4 s
2 min
>
uni
MTF
>
>
>
3 s
1 min
>
uni
>
>
>
enhanced
1 s
1
A
low
off
>
>
>
2 s
30 s
2
B
>
bi
0
1
2
3
4
5
6
7
8
9
on
on
motion
or
presence
off
off
motion
The sensor LED will briefly flash RED during monitoring communication with door control.
This indicates that external monitoring is functional.
Monitoring functionality must be active on the sensor and monitoring wires must be properly connected to the door control.
The sensor LED will briefly flash RED during monitoring communication with door control.
This indicates that external monitoring is functional.
Monitoring functionality must be active on the sensor and monitoring wires must be properly connected to the door control.
MTF: motion tracking feature
