Page 12 of 12
75.5871.04 BR3-X 20180702
Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462
General Tech Questions: [email protected] | Tech Docs: www.BEAinc.com
Page 12 of 12
75.5871.04 BR3-X 20180702
BEA, the sensor manufacturer, cannot be held responsible for incorrect installations or inappropriate adjustments of the sensor/device; therefore, BEA
does not guarantee any use of the sensor outside of its intended purpose.
BEA strongly recommends that installation and service technicians be AAADM-certifi ed for pedestrian doors, IDA-certifi ed for doors/gates, and factory-
trained for the type of door/gate system.
Installers and service personnel are responsible for executing a risk assessment following each installation/service performed, ensuring that the sensor
system installation is compliant with local, national, and international regulations, codes, and standards.
Once installation or service work is complete, a safety inspection of the door/gate shall be performed per the door/gate manufacturer recommendations
and/or per AAADM/ANSI/DASMA guidelines (where applicable) for best industry practices. Safety inspections must be performed during each service
call – examples of these safety inspections can be found on an AAADM safety information label (e.g. ANSI/DASMA 102, ANSI/DASMA 107).
Verify that all appropriate industry signage and warning labels are in place.
BEA INSTALLATION/SERVICE COMPLIANCE EXPECTATIONS
TECHNICAL SPECIFICATIONS
Supply Voltage
12 − 24 VAC/VDC ±10%
Current Consumption
30 − 130 mA (DRY output)
Temperature Rating
-15
−
150
°
F (-26
−
150
°
C)
If powered by AC voltage and using WET output to convert to DC voltage and current draw of
device is greater than 0.9 A, the upper temperature range is 130
°
F (54
°
C)
Input
Input 1, 2, 3, 4
WET input
DRY contact
5-24 VAC/VDC ±10%
Contact Rating
Relay 1 (DRY)
Relay 1 (WET)
Relay 2
Relay 3
3 A @ 24 VAC or 30 VDC
1 A
3 A @ 24 VAC or 30 VDC
1 A @ 24 VAC or 30 VDC
Dimensions
5.2" x 2.2" x 1" (133 mm x 55 mm x 25 mm)
Housing
ABS - white translucent
Specifications are subject to change without prior notice.
All values measured in specific conditions.
PLEASE KEEP FOR FUR
THER USE – DESIGNED FOR COLOR PRINTING
©BEA
| Original Instructions |
75.5871.04 BR3-X 20180702
