BE HL060F, Руководство пользователя

Страница: 13 / 44

13
The propane (LP) gas tank must also be equipped with the following:
1. A collar to protect the gas valve.
2. A shut-off valve terminating a propane gas cylinder valve outlet as
specified in the American National Standard for Compressed Gas
Cylinder Valve Outlets and Inlet Connections.
3. A safety relief valve having direct communications with the vapor space
of the tank.
4. An arrangement of vapor withdrawal.
NOTE: The Propane (LP) gas pressure regulator and hose assembly
supplied with this heater must be used without alteration.
Operation
REFILLING THE PROPANE GAS TANK
1. Turn heater gas valve knob and gas tank valve to OFF position.
2. Propane tank valve equipped with old style fitting has LEFT-HANDED
THREADS. Turn fitting CLOCKWISE to loosen. Protect this fitting
when disconnected from tank.
3. Have tank filled by your local Propane gas supplier.
4. Some propane tanks have a bleed-off valve. This valve should
be inspected for leaks after each filling of the tank. Turn the valve
clockwise to close.
5. Fasten full Propane tank and connect proper fitting to tank valve by
turning COUNTERCLOCKWISE.
6. With heater gas valve knob still in OFF position, turn ON tank valve
and check for leaks with soap solution.
Average
Temp (°F)
HL060F HL125F HL150F
32° 1 2 2
20° 1 2 2
10° 1 3 3
0° 1 3 3
-10° 2 Use Larger Tank Use Larger Tank
-20° 2 Use Larger Tank Use Larger Tank
WARNING
• Purging and filling of LP tanks must be performed by personnel
who have been thoroughly trained in accepted LP gas industry
procedures. Failure to follow these instructions may result in
explosion, fire, sever personal injury or death.
OPERATION