BE Power Equipment 85.403.014, Руководство пользователя

Страница: 7 / 20

7
WARNING
Nozzle has been set according to factory set alignment.
Operating
Never reach under the unit while the high-pressure cleaner is
operating
•
Never direct the 14” Whirl-A-Way at humans or animals.
•
Do not operate on a ladder.
During operation, should you experience a buildup of small stones
or other foreign material within the cover, we recommend that you
simply tip the cleaner on its side at 45° which should expel any foreign
materials. This will extend the life of your tips and rotary arm. The tips
that have been installed on your surface cleaning system permit the
use of your cleaner with a pressure washer producing up to 4 GPM at
4000 PSI. This unit will not spin efficiently with pressure under 2.3
GPM. Periodically check the tips to ensure they are not plugged by dirt
particles. It is very important when operating your 14” Whirl-A-Way,
that you maintain a continuous motion.
Should you leave the cleaner in a stationary position, the surface being
cleaned can be seriously damaged by the high pressure.
Recommended Applications
use with a gun and lance
Connect to lance using q/c fittings on the lance and 14” Whirl-A-
Way.
For 4GPM, use #020 nozzle
Attach to long wand
Attach to a longwand for cleaning hard to reach surfaces.
Connect to longwand using the QC fittings on the longwand
and 14” Whirl-A-Way.
OPERATING