Version 0.2
31 July 2013
www.iHome.eu
Mode 2: Control mode
This mode is mainly used to control a Z-Wave other device by directly sending a BASIC_ON or BASIC_OFF.
Product can act on 2 types of handles.
When single pressed (and hold):
Press and hold the button, the duration to hold depends on the configured
values (parameter 2) .
When double pressed:
quickly (within 500 msec) double press the button.
This mode can be configured with the following frame:
CONFIGURATION_SET
Parameter:
0x04
Size:
0x01 (can’t be different from 1)
Value:
0x01 – 0xFF
Below figure shows an overview of the Z-Wave frames, values and association groups.
When single pressed (and hold)
BASIC_SET
Value = 0xFF
To assocation group 1
When double pressed
BASIC_SET
Value = 0x00
To assocation group 1
