Seite
20
von
27
3. DESCRIPTION OF THE CONTROL PANEL AND REMOTE CONTROL
The buttons on the control panel and the remote control are identical.
You can set the functions of the humidifier using the remote control or directly on the
device.
When using the remote control, this must be pointed directly at the sensor on the
housing to ensure that it functions properly.
UV + ION Timer Humidity Warm Fog
Auto Mode ON/OFF Fog Level
+ Sleep Mode
4. INSTALLATION OF THE REMOTE CONTROL
Please refer to the following instructions:
To use the remote control for the first time, please pull the plastic protection out of the
battery compartment.
To change the battery, do the following:
1. Pull out the battery holder on the back of the remote control, remove the old
battery and then insert a new one:
2. Please always pay attention to the polarity markings (+/-) on the
battery and the battery holder.
3. Then slide the battery holder all the way back into the remote control.
5. SET FUNCTIONS
1.
ON/OFF
Use the on / off button to turn the device on and off. As soon as you switch on
the device, mist emerges from the mist nozzles on the top of the device and the
current temperature in C ° and humidity in% are shown alternately on the display.
