MAINTENANCE OF THE BLADES
1. Push the blade out of the machine, then use the cleaning brush
to wipe off the scraps among the blade. Lubricate the space
between the stationary and the moving blades with 2 or 3
drops of oil .
2. Clean the blade everytime after use.
CHARGING
Please don’t charge if the temperature is lower than 0°C or
higher than 40°C. Please don’t charge if it is nearby the sunlight
perpendicular incidence or the heat source radiates.
The standard charging time is 2 hours. In order to avoid
mangling the batteries, please don’t extend the charging time.
CAUTIONS
Clean the housing using only a cloth that is slightly dampened with
water or a mild soap solution. Never use a caustic solution. Never
submerge the clipper in water. Keep away from the children.
This clipper may become warm during operating and/or
charging, this is normal. When holding the clipper, don’t hold the
power soft line, in order to prevent possible harm to soft line and
to avoid accidents. Never tamper with moving parts.
TECHNIC DATA
Rating voltage: 3, 7 V
Charging time: 2 hours
This appliance is not intended for use by persons (including
children) with reduced physical, sensory of mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety; Children should be
supervised to ensure that they do not play with the appliance.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, such as the unused batteries
and motors etc, recycle them responsibly to promote the
sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take
this product for environmental safe recycling.
