background image

BE-RCRxxxG USER MANUAL     

3

CRITICAL TERMS: 

The critical terms DANGER, WARNING and CAUTION are used with the safety messages in this manual and 

with each safety decal. They are defined as follows: 

DANGER:

Indicates an immediate hazardous situation that, if not avoided, could result in serious injury or death. This 

Critical Term is to be limited to the most extreme situations, typically for machine components that, for 

functional purposes, cannot be guarded. 

WARNING: 

Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death, and 

includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe 

practices. 

CAUTION: 

Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It also 

may be used to alert against unsafe practices.

TO THE CUSTOMER 

This manual contains valuable information about your new mower. It has been carefully prepared to give you 

helpful suggestions for operating, adjusting, and servicing. 

Keep this manual in a convenient place for quick and easy reference. Study it carefully, only by proper care 

and operation can you expect to receive the service and long life designed and built into this mower. 

It is the owner’s and/or operator’s responsibility to… 
• Read and understand the information contained in this manual.
• Operate, lubricate, assemble and maintain the equipment in accordance with all instructions and safety 

procedures in this manual.

• Inspect the equipment and replace or repair any parts that are damaged or worn which could cause 

damage, wear to other parts, or cause a safety hazard.

SAFETY 
READ AND FOLLOW THE INSTRUCTIONS IN THIS MANUAL, ESPECIALLY IN THE SAFETY SECTION. 

FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH. 

TAKE NOTE! THIS SAFETY ALERT SYMBOL IS FOUND THROUGHOUT THIS MANUAL. THIS SYMBOL IS 

USED TO CALL YOUR ATTENTION TO INSTRUCTIONS CONCERNING YOUR PERSONAL SAFETY AND THE 

SAFETY OF OTHERS. 

This symbol means attention. Be on the alert! Your safety in involved!

Содержание BE-RCR G Series

















Отзывы: