LB55 USER MANUAL
5
OPERATING SAFETY IN GENERAL
1. Be very careful when loading or unloading the leaf blower.
2. Slow down and use caution when making turns and crossing roads and sidewalks.
3. Do not run the engine in an enclosed area where dangerous carbon monoxide fumes can collect.
4. Always maintain secure base and solid balance while starting or operating the machine. Never lean
directly over the machine. Machine should be installed completely before operating, ensure the adjustable
plate and wheel are installed well per instruction. Keep a safe distance between two or more operators
when working together simultaneously.
5. Be sure the area is clear of other people before operating. Stop the unit if anyone enters the area.
6. Do not look into the Air Outlet when the machine is running.
7. Operate the machine only in daylight or good artificial light.
8. Do not operate the unit while under the influence of alcohol or drugs.
9. Always wear eye and hearing protection when operating this unit.
10. Keep in mind the operator is responsible for accidents occurring to other people or property.
11. Never operate the machine without proper guards, plates, or other safety protective devices in place.
12. Thoroughly inspect where equipment is to be used and remove all foreign objects.
Starting
1. Start only according to instructions in this manual or on the machine.
2. When starting the engine, make sure hands and feet are away from the intake or discharge of blower.
3. Do not change engine governor settings or overspeed the engine. Operating the engine at excessive
speed can increase the hazard of personal injury.
Interrupting operation
1. Never attempt to reposition or machine while it is running. Doing so could cause the machine to tip over,
and cause unexpected injury.
2. Never leave the machine running unattended.
3. Please park the equipment on the flat ground and turn off the engine.
4. Never continue to operate the machine if it starts making unusual noise or vibration. Shut the engine off
immediately, allow the impeller to stop, disconnect the spark plug wire and secure the wire away from the
spark plug. Inspect the unit for any signs of damage or foreign material
5. When equipment is not used, always turn off the engine, wait for the impeller to come to complete stop,
and disconnect the spark plug before leaving the area. Always move the unit to a safe storage area when
not in use.
MAINTENANCE SAFETY IN GENERAL
1. Only allow professional and technical personnel to repair the equipment.
2. Never attempt to perform any maintenance, repairs, or attachment of accessories while the unit is
running. Always shut the engine off, allow the impeller to come to complete stop, and remove the spark
plug wire from the spark plug before removing excess materials.
3. Always make sure that the intake and discharge are empty before starting the unit after it has spark plug
been idle. Attempting to start the unit with material in these areas could cause the engine starting cord to
stop
4. Use only attachments and accessories approved of by the manufacturer of the machine.
5. Never attempt to make any adjustments while the engine is running.
6. After striking a foreign object, stop the engine, remove spark plug wire, and wait for all moving parts to
come to a complete stop. Thoroughly inspect the machine for any damage, repair the damage before
restarting and operating the machine.
