LB55 USER MANUAL
7
Adding Fuel
To add fuel:
1. Remove the fuel cap.
2. Fill the tank. Do not overfill. Leave room in the tank for fuel expansion. Refer to your engine manual for
specific fuel recommendations.
3. Install and hand tighten the fuel cap.
Starting the Engine
1. See engine manual for starting up instructions.
2. Ensure engine is running full throttle before beginning operation.
Notes: For some engines, there may not be throttle.
Stopping the Engine
1. See engine manual for shut down procedure.
2. With engines equipped with an adjustable throttle, move the throttle to the SLOW position and wait for
engine to be running a slow RPM. Then switch to STOP ENGINE as shown in the engine manual.
Notes: Stopping the engine is the only way to stop the rotor from turning.
ASSEMBLING
Installation of Universal Wheel Frame
1. Insert the rotating shaft of the universal wheel
frame (A) into the sleeve of the support frame
(B).
2. Fix with M8x45 flange bolt (C) and M8 flange nut
(D). (See Figure 1).
Install 10 “ back wheels
1. Install the 10” back wheel (A) on both sides of the
axle (B), then insert the R pin (C) into the axle (B)
and fix it. (See Figure 3).
Installation bracket
1. Fix bracket (B) and M8 flange face loosening nut
(A) on side plate (C). (See Figure 2).
A
B
C
D
Figure 1
B
C
A
Figure 2
A
B
C
Figure 3
