BE-WCGF4xxx USER MANUAL
21
OPERATION
HOURS
PROCEDURE
COMMENTS
Break in
• Change engine oil and filter after first
five hours.
• Check belt tension.
• Check all nuts and bolts for tightness.
• Follow oil recommendations per the engine
& owner’s manual.
• Adjust per directions.
• Tighten if necessary.
8 hours
• Check engine oil.
• Check chipper knife for sharpness.
• Check knife and wear plate gap.
• Clean air filter.
• Grease bearings in basic chipper. *
• Per recommendations, do not overfill.
• See knife information.
• See gap setting information.
• Per engine recommendations.
• Use high quality multipurpose lithium
grease.
40 hours.
• Change engine oil. **
• Check tire pressure.
• Remove and sharpen or replace chipper
knife.
• Sharpen wear plate.
• Per recommendations, do not overfill.
• Add or adjust as required.
• See knife information.
• See wear plate information.
100 hours
• Replace belt.
• Change engine oil.
• Order replacement belts.
• Per recommendations, do not overfill.
200 hours
• Change engine oil filter.
• Clean and adjust, or replace spark plugs.
• Per recommendations in engine manual.
• Per recommendations in engine manual.
LUBRICATION AND MAINTENANCE
* No more than 3 shots from a hand grease gun. Do not over-grease as this may damage the bearing.
** Lubrication schedule may vary depending on working environment. Overly dirty and dusty situations
will require more frequent oil changes to protect the engine.
Содержание AgriEase BE-WCGF4 Series
Страница 23: ...BE WCGF4xxx USER MANUAL 23...