BDS MABasic 200, Перевод оригинальной инструкции по эксплуатации

Страница: 14 / 20

14 MABasic 200, 400, 450, 850,
GB
Cleaning
WARNING
► Switch off the machine and pull the
plug out of the mains socket before
starting maintenance and cleaning.
► When using compressed air for
cleaning, wear protective goggles and
gloves and protect other persons in
the working area.
ATTENTION
► Never immerse the machine in water
or other liquids.
After each use
‹
Remove the inserted tool.
‹
Remove swarf and coolant residues.
‹
Clean the tool and the tool holder on
the machine.
‹
Clean the guide of the machine slide.
‹
Put the machine and accessories into
the transport case.
Maintenance
WARNING
Danger caused by unqualified repairs!
Unqualified repairs can lead to consid -
erable danger for the user and cause
damage to the machine.
► Repairs to electrical appliances may
only be carried out by the works cus-
tomer service or by specialists trained
by the manufacturer.
Adjusting the machine slide guide
If the machine slide guide (9) exhibits too
much clearance, it must be adjusted. To do
this, proceed as follows:
‹
Loosen the clamping bolts.
‹
Tighten the adjusting screws evenly.
‹
Tighten the clamping bolts again.
Replacing the carbon brushes
Replacement of the carbon brushes may
only be carried out by BDS or by an au-
thorised specialist workshop. Unauthorised
repairs will invalidate the guarantee.
Customer service/service
Should you have any questions on custom-
er service/service, please contact BDS.We
will be happy to give you the address of
your nearest service partner.
Storage
Storage
If you do not intend to use the machine
for a longer period of time, clean it as
described in the section Cleaning . Store
the machine and all its accessories in the
transport case at a dry, clean and frost-free
location.
Cleaning/maintenance