11
MABasic 200, 400, 450, 850
GB
MABasic 200 and 400
Insert the core drill into the direct tool
mount (illustration A)
Before mounting, clean the Weldon
shank and direct tool mount (2) of the
machine.
Check the cable connection for
grease.
Unscrew both hexagonal socket
screws in the direct tool mount using
the hexagonal offset screwdriver (24)
supplied.
Insert the core drill in the direct tool
mount (2).
NOTE
►
Insert the appropriate ejector pin (22)
before inserting the core drill.
Tighten both hexagonal socket screws
in the direct tool mount (2) using the
hexagonal offset screwdriver (24)
supplied.
Removing the tool
Unscrew both hexagonal socket
screws in the direct tool mount (2)
using the hexagonal offset screwdriv
-
er (24) supplied and remove the core
drill from below.
MABasic 450 and 850
Insert the core drill into the industrial
tool holder (illustration B)
Push the industrial tool holder (25) into
the spindle taper of the machine.
Before inserting, clean the Weldon
shank of the tool and the tool holder.
Check the cable connection for
grease.
Unscrew both hexagonal socket
screws in the tool mount using the
hexagonal offset screwdriver (24)
supplied.
Insert the core drill into the tool mount.
NOTE
►
Insert the appropriate ejector pin (22)
before inserting the core drill.
Tighten both hexagonal socket screws
in the tool mount (2) using the hexago-
nal offset screwdriver (24) supplied.
Removing the tool
Unscrew both hexagonal socket
screws in the tool mount (2) using
the hexagonal offset screwdriver (24)
supplied and remove the core drill
from below.
Preparing
Содержание MABasic 200
Страница 1: ...MABasic 200 400 450 850 Translation of the Original Operating Instructions GB...
Страница 2: ...7 5 4 2 9 8 1 6 3 11 10 12 13...
Страница 18: ...18 MABasic 200 400 450 850 GB...
Страница 19: ...23 22 21 20 25 24 B A...
