BDS MAB 455, Оригинальная инструкция по эксплуатации

Страница: 8 / 22

8 MAB 455
GB
ATTENTION
► Do not crush the connecting cable.
► Do not subject the connecting cable
to heat or chemical liquids.
► Do not pull the connecting cable
across sharp edges or hot surfaces.
► Lay the connecting cable in such
a way that it cannot be caught and
wound up in the rotating part of the
machine.
Safety equipment
Restart protection
NOTE
► The machine stops automatically
when the magnetic clamp is switched
off or if the power supply is interrupt -
ed.
In order to prevent the machine from
starting unexpectedly after switching on the
magnetic clamp again or after reconnection
following interruption to the power supply
("restart protection"), the machine must be
switched on using the ON/OFF switch.
Magnet indicator
The magnet indicator (22) provides visual
indication of the magnetic clamping force.
■ Magnet indicator (22) lights up GREEN :
The magnetic clamping force satisfies
the minimum requirements.
Processing can take place.
■ Magnet indicator (22) lights up RED :
Insufficient magnetic clamping force.
Do not process with the machine. This
can be the case if the material is too
thin, the surface is uneven or if coated
with paint, scale or zinc.
Safety