13
MAB 455
GB
Straight
shank
Use drill chuck with MK2/B16
tapered mandrel
(available as accessory).
Thread
tap
Use KEYLESS quick-change
drill chuck system (A) with
the appropriate adapter (G)
for thread taps
(available as accessory).
MK tool mounting
WARNING
Risk of injury from incorrectly inserted
tool!
An insufficiently secured tool can lead to
serious injuries.
►
Check the proper seating of the tool,
adapter or drill chuck in the MK tool
mounting.
Inserting the tool
Before mounting, clean the shank of
the tool, adapter or drill chuck and the
spindle taper (3) of the machine.
Insert the tool into the spindle taper (3)
of the machine from below.
Removing the tool
Turn the tool until the ejector pin (E)
slips into the opening for the ejector
pin (4).
Lever out the tool with the ejector
pin (E) or loosen the tool by tapping
against the ejector pin.
Using the drill chuck
WARNING
Risk of injury!
An insufficiently secured tool can lead to
serious injuries.
►
Turn the drill chuck only with the
chuck key provided.
►
Always remove the chuck key from
the drill chuck after tightening or
loosening.
Inserting the drill chuck
Insert the drill chuck onto the tapered
mandrel and insert the combination
into the spindle taper (3) of the ma-
chine.
Open the drill chuck and insert the tool
into the drill chuck.
Close the drill chuck by hand and then
turn the drill chuck with the chuck key.
Removing the drill chuck
Loosen the drill chuck with the chuck
key and remove the tool.
Turn the drill chuck until the ejector
pin (E) slips into the opening for the
ejector pin (4).
Lever out the drill chuck with the ejec-
tor pin (E) or loosen the drill chuck by
tapping against the ejector pin.
Preparing
Содержание MAB 455
Страница 1: ...MAB 455 Translation of the Original Operating Instructions GB...
Страница 2: ...8 4 2 5 1 3 Fig 1 21 23 22 6 9 11 7 12 13 10...
Страница 21: ...B C D E A Fig 2 Fig 3...
