S1-8
Serial Control Enable - ON = Enabled - Factory Default ON
Digital Parameter Switch Selection:
S2-1
AES Error Switching Delay – Factory Default ON
S2-2
Unlock – ON - Factory Default ON
S2-3
Parity – ON -Factory Default ON
S2-4
- UNUSED -
S2-5
CRC
S2-6
Audio Bit
S2-7
Non-PCM Audio
S2-9
Remote Control – Parallel/GPIO DB9F Connection Table 2.
Pin 1 Source D Status
Pin 2 Source D Select
Pin 3 Source B Select
Pin 4 Source A Select
Pin 5 Source C Select
Pin 6 Status Common
Pin 7 Source B Status
Pin 8 Source A Status
Pin 9 Source C Status
Command input pins require a momentary closure to common. Status connections open collector
outputs which require a 5 VDC pull up.
6
