Cable
Heating Strip
Steel Safety Rope
Figure 2-8
Please refer to Figure 2-9 to install bottom cover.
Please line the two round grooves of bottom cover side to the two captive screws on
the bottom cover side. The angel shall ranges from -5 degrees to +5 degrees. Then
you can push the bottom cover up and fix the captive screws.
You can find the lubricating grease in the accessories package.
Round grooves
Captive Screws
Lubricating Grease
Figure 2-9
2.3
Corner Bracket Speed Dome Installation
2.3.1 Installation
Requirement
The corner installation speed dome is suitable for indoor or outdoor hard wall
environment where the angel is 90 degrees.
The wall thickness shall support the expansion bolt.
The wall shall support the 4x speed dome weight.
2.3.2 Corner Bracket and Hanging Bracket Installation
Take the corner bracket as template, draw the hole position in the 90 degrees wall.
Then you can dig holes and fix the M8 expansion bolts firmly. See Figure 2-10.
13
