If your umbrella pole does not fit the provided stand, the base weight can be used with the umbrella’s
original stand.
1.
Remove screws from your umbrella to detach the stand.
2.
Slide the pole through the part A base weight. Replace screws to reattach the stand.
3.
Stand umbrella upright and fill base weight with water or sand.
6
|
ALTERNATIVE SET-UP
USAGE TIPS
•
Base weight can be used with provided stand or without.
•
It is recommended that the base weight is filled with water.
•
Do not fill with water if climate dips below freezing.
•
In areas with high wind or extremely cold weather, filling base weight with sand is recommended.
•
Do not stand or jump on the base weight.
•
Avoid moving base weight when it is filled.
•
It is recommended that you take umbrella down in high winds.
