BCM GT440ZX, Руководство пользователя

Страница: 50 / 57

50
4. BIOS SETUP
When enabled, an Advanced Power Management device will be activated to enhance
the Max. Power Saving mode and stop the CPU internal clock. If Advance Power
Management (APM) is installed on your system, selecting Yes gives better power
savings.
If the Max. Power Saving is not enabled, this will be preset to
No .
Video Off Method
Determines the manner in which the monitor is blanked.
V/H SYNC+Blank
System turns off vertical and horizontal synchronization ports
and writes blanks to the video buffer.
DPMS Support
Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video
Electronics Standards Association (VESA). Use the software
supplied for your video subsystem to select video power
management values.
Blank Screen System only writes blanks to the video buffer.
Video Off After
As the system moves from lesser to greater power-saving modes, select the mode in
which you want the monitor to blank
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The choices: 3, 4, 5, 7, 9, 10, 11, NA.
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock will run at
slower speed while all other devices still operate at full speed.
Standby Mode
When enabled and after the set time of system inactivity, the fixed disk drive and the
video would be shut off while all other devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU
will be shut off.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be