BCM GT440ZX, Руководство пользователя

Страница: 45 / 57

45
4. BIOS SETUP
assigns physical drive B to logical drive A, and physical drive A to logical drive B.
Boot Up Floppy Seek
When Enabled, the BIOS tests (seeks) floppy drives to determine whether they have 40
or 80 tracks. Only 360-KB floppy drives have 40 tracks; drives with 720 KB, 1.2 MB,
and 1.44 MB capacity all have 80 tracks. Because very few modern PCs have 40-track
floppy drives, we recommend that you set this field to
Disabled to save time.
Boot Up NumLock Status
Toggle between On or Off to control the state of the NumLock key when the system
boots. When toggled On, the numeric keypad generates numbers instead of controlling
cursor operations.
Typematic Rate Setting
When Disabled, the following two items (Typematic Rate and Typematic Delay) are
irrelevant. Keystrokes repeat at a rate determined by the keyboard controller in your
system. When
Enabled, you can select a typematic rate and typematic delay.
Typematic Rate (Chars/Sec)
When the typematic rate setting is enabled, you can select a typematic rate (the rate at
which character repeats when you hold down a key) of 6, 8, 10,12, 15, 20, 24 or 30
characters per second.
Typematic Delay (Msec)
When the typematic rate setting is enabled, you can select a typematic delay (the delay
before key strokes begin to repeat) of 250, 500, 750 or 1000 milliseconds.
Security Option
If you have set a password, select whether the password is required every time the
System boots, or only when you enter Setup.
PCI/VGA Palette Snoop
Some display cards that are not standard VGA such as graphics accelerators or MPEG
cards may not show the correct colors, the setting can correct this problem once you set
it to Enabled, to default setting leave at Disabled.