MX310HD User’s Manual
50
1.11
The Expansion Slots
In the future, you may need to install expansion cards. The following sub-sections describe the
expansion slots and the expansion cards that they support.
Make sure to unplug the power cord before adding or removing expansion cards.
Fail to do so may cause injury and damage mainrboard
1.11.1 Installation of Expansion Card
To install an expansion Card:
1. Before install the expansion card, read the documentation that came with it and make the necessary
hardware setting for the card.
2. Remove the chassis cover (if the mainboard is installed in a chassis).
3. Remove the expansion slot bracket from the chassis on the slot that you intend to use. Keep the screw
for later use.
4. Align the card connector with the slot and press it firmly until the card is completely seated on the slot.
5. Secure the card to the chassis with the screw that have been removed earlier (in step 3).
6. Place the chassis cover back on.
1.11.2 Setup An Expansion Card
After installing the expansion card, configure it by adjusting the software settings.
1. Turn on the system and change the BIOS settings if necessary. See Chapter 2 for information on BIOS
setup.
2. Assign an IRQ to the card if necessary.
3. Install the software drivers for the expansion card.
