BC Biomedical PFC-3000 SERIES, Руководство пользователя, Страница: 35 / 90

U
SER
M
ANUAL
F
LOW
A
NALYZER
TM
Page 31 / 84
7.8 Statistics Display The four statistics displays show the current readings, minimum,
maximum and mean values for the measured variables. The
variables in the statistics display correspond with the variables in
the numerical display.
7.8.1 Specification of the
Statistics Display
(1)
Number of the statistics display. You can switch
between four different statistics displays. The number of
the statistics display corresponds with the number of the
numerical display.
(2) Measured variable . Shows the measured variable.
Variables can be changed in the configuration monitor (>
7.7.1 Specification for the Configuration Display).
(3) Current reading. Shows the actual measured value
using the same units as in the numerical display..
(4) Min. This value shows the lowest value measured since
the last reset.
(5) Max . This value shows the highest value measured since
the last reset.
(6)
Mean . This value shows the arithmetic average of all
values measured since the last reset. After one minute a
moving average of one minute is displayed.
(7)
Reset . Press this key to reset the statistical values to
zero. Simultaneously, all respiratory parameters will be
set to “no Tr”.
(8)
Next . Use this key to switch from one of the four
statistics displays to the next.
(9)
(10)
Numerical . Press this key to exit the statistics display.
The numerical display returns.
Store. Press this key to save measurement parameters.
1
2
3
4
5 6
7
8
9
In the statistic display the same units are being used
as defined in the numeric display!
10