BC Biomedical PFC-3000 SERIES, Руководство пользователя, Страница: 33 / 90

U
SER
M
ANUAL
F
LOW
A
NALYZER
TM
Page 29 / 84
(6) Power supply . This symbol appears when the device is
connected to the power supply.
The analyzer can also be operated with the built-in
battery. A battery symbol appears to indicate battery
operation and loading status of battery:
Battery full
Battery empty
– Please recharge!
A warning message appears if the battery gets very low
(> 5.4 Battery Mode).
(7) USB . The analyzer can be connected to a PC via the
USB connection. This symbol appears if a connection to
the PC has been established.
(8) Measured variable . Shows the variable. Variables can
be changed in the configuration monitor (> 7.7.1
Specification for the Configuration Display).
(9) Unit of measurement . Shows the unit of the variable.
Units can be changed in the configuration monitor (>
7.7.1 Specification for the Configuration Display).
(10)
Config. Press the assigned key to reach the
configuration display. Here you can change the variables
and unit of measurement (> 7.7 Configuration Display).
(11) Statistics . Press the assigned key to reach the statistics
display, where you can view the minimum, maximum and
average values for the individual variables (> 7.8
Statistics Display).
(12) Reading . Shows the actual measured value.
(13)
Next . Use the assigned key to move between the four
numerical displays.
(14) Menu. Press the assigned key to reach the menu
display. You can access the gas type, volume trigger,
calibrations, language and system info from the menu.