BC Biomedical PFC-3000 SERIES, Руководство пользователя, Страница: 34 / 90

U
SER
M
ANUAL
F
LOW
A
NALYZER
TM
Page 30 / 84
7.7 Configuration
Display
The numerical displays can be configured in the four configuration
displays. Here you can change the variables and corresponding
units of measurement for all four numerical displays.
7.7.1 Specification for the
Configuration Display
(1) Number of configuration display. You can switch
between four different configuration displays. The
number of the configuration display corresponds with the
number of the numerical display.
(2) The measured variable currently shown on the
numerical display (> 15 Appendix B: Values and Units).
You can highlight any value in the display by pressing
the arrow keys. A red LED alerts you to the
corresponding mechanical connection.
(3) The unit of measurement used to for the variable in the
numerical display (> 15 Appendix B: Values and Units).
(4) Change . This key switches you to edit mode so that you
can change the corresponding variable or unit of
measurement. Press
Save to save the new value.
(5) Next . Use this key to switch from one of the four
configuration displays to the next.
(6) Numerical . Press this key to exit the configuration
display. The numerical display returns.
1
2
3
4 5
6