BC Acoustique EX362D, Руководство пользователя

Страница: 9 / 12

9
Preamplifier section
Line level input XLR (LINE 1)
Sensitivity: 600 mV / Impedance: 47 kΩ
Line level input RCA (LINE 2, LINE 3)
Sensitivity: 600 mV / Impedance: 47 kΩ
Amplifier section
Continuous average power 2x80W into 8Ω
Distortion ≤ 0,004% (1kHz, 1W)
Signal/Noise ration ≥ 91dBA
Bandwidth: 20Hz-20kHz
Input Impedance: 47 kΩ
Output Impedance: 4-8Ω
Connectors
1x XLR line stereo input (LINE 1)
2x RCA line stereo input (LINE 2 and LINE 3)
1x Digital inputs: 1x Optical & 1x Coaxial (DAT)
1x OPTIONAL CARD Input (OPTION or LINE 4)
1x Pré-out RCA and XLR stereo outputs
1x Trigger output (Jack 3,5mm mono)
1x Headphone output (jack 6,35 mm) front panel
Speaker terminals screw-compatible banana plugs
General
Detachable power cable
UNIT
Dimensions (W×H×D): 460x180x464.1 mm / Weight: 27 kg
BOX
Dimensions (W×H×D): 580x295x605 mm / Weight: 30 kg
Volume: 0.10 m
3
EAN CODES
EX362D Black: 0820103857147
EX362D Silver: 0820103857154
Here you will find a number of fault description and
possible solutions we invite you to read in order to ensure
the possibility of an actual breakdown of your device.
The unit does not turn on.
- Make sure the power cord is properly connected.
- Make sure the plug is fully inserted into the wall outlet
and there is power.
- Make sure the camera is turned on.
- Check the fuse in the mains plug or adapter if necessary.
There is no sound
- Make sure the unit is not in standby mode.
- Check that the source component is connected properly.
- Make sure your speakers are properly connected.
One channel no sound
- Make sure the balance control is in the correct position.
- Check the speaker connections.
- Check interconnects.
A loud humming or buzzing is noticeable
- Check turntable or tonearm to capture an ground fault or
a faulty connection.
- Make sure that interconnect cable is loose or defective.
- Make sure your tape deck or turntable is not too close to
the amplifier.
The bass is weak or the stereo image is diffuse
Make sure the speakers are not in phase.
The sound is distorted
Make sure that the control settings of volume or tone is not
too high.
The remote control does not work
- Check that the batteries have not expired.
- Make sure nothing is blocking the remote sensor.
In case the above solutions do not remedy your problem,
check our FAQ section (Frequently Asked Questions) on our
website: www.bc-acoustique.com
For repair, during or after the warranty, please contact your
dealer.
To obtain warranty service and technical support, thank you
kindly to register your product online on the website
www.bc-acoustique.com at the product registration
section.
BC ACOUSTIQUE
BP 306
94709 Maisons-Alfort Cedex France
www.bc-acoustique.com
Specifications Troubleshooting
Troubleshooting
EN
G
LIS
H