BC Acoustique EX362D, Руководство пользователя

Страница: 7 / 12

7
④ BIAS LEVEL
This button allows you to adjust the bias control power
stages of EX362D. When the light is off around the BIAS
LEVEL knob, the EX362D works in pure Class-A up to 50% of
its maximum power.
Beyond, the EX362D works in Class-AB. When the button is
activated (and therefore light), the polarization of the
power stages is at its maximum level, the EX-362D operates
in pure Class-A to its maximum level.
Note: The operation in Class-A pure power stages induces
significant heat dissipation and therefore high temperature
from the external radiators.
Accordingly, in case of prolonged amplifier moderate use,
we recommend using the intermediate level of polarization
(the light above the button will turn off). This will effectively
prevent significant heat dissipation unnecessary.
⑤ DIMMER
This button allows you to vary the intensity of bright Leds
volume control.
⑥ VOLUME
This knob adjusts the output volume of the amplifier at the
speaker outputs.
SOURCE SELECTOR
.
These buttons select the active input of the amplifier and
the signal sent to the speakers, to headphones and Preamp
output and REC LINE. The buttons on the remote control
are identical to those buttons. Once the selected button,
the integrated LED corresponding entry under the particular
input button will turn white.
⑦ DAC - OPTIC & COAXIAL INPUTS
This button activates the digital input on the back of the
amplifier. It allows listening to the digital source connected
to the amplifier with the integrated digital-to-analog
converter.
Note: You can leave connect two sources (one on the
Optical input, and the other on the Coaxial input) and
activate the one that suits you the best by pressing the DAC
button.
⑧ LINE 1 & LINE 2 (INPUTS)
These buttons are used to select sources present on XLR
(balanced) and RCA inputs (line level) with the same name
located on the rear panel of the amplifier.
LINE 3 (INPUT) / BYPASS
This button selects the source present on the RCA inputs
(line level) of the same name located on the rear panel of
the amplifier. This input has a switch (on the rear panel) to
override the functions of Gain and Tone. It is usually used to
connect it to the part of an AV amplifier preamp.
⑨ OPTION
Without Optional card: This button selects the listening to
a 4
th
source you have connected to the RCA OPTION
connectors (rear panel).
With Optional card: This button allows you to select the
source to play on your option card. (See notice of the said
optioncard).
Example of option card: Bluetooth card allows you to listen
to your music from your Smartphone.
⑩ IR SENSOR
This window receives IR commands (Infra Red) from the
remote control. It is essential that there is no obstacle
between the remote control and the sensor.
⑪ ON / OFF BUTTON
This switch allows shutdown or operation of the amplifier.
Connections and uses
EN
G
LIS
H