GSS3219B
Owner’s Manual
7
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if
necessary.
Estimated assembly time: 30 minutes.
Step 1 (The
Magnet
assembly)
Note: Before beginning assembly, make
certain the two swivel casters on the
bottom assembly (A) are locked.
a) Align the holes on the magnets
（
W
）
with the holes on the cart bottom.
b) Insert one bolt (CC), one spring
washer (GG) and one flat washer (HH)
into each pre-drilled hole. Tighten
bolts by hand until secured.
c) Go back and tighten all bolts using the
screwdriver provided.
Step 2 (The cart side panels assembly)
a)
Loosen the six pre-installed bolts on bottom
assembly (A) and allow 1/4 bolt’s length to
extend from the bottom assembly.
b)
Align the three large holes on the cart right
side panel (C) with the three bolts extended
from the bottom assembly.
c)
Slide the cart right side panel (C) until it locks
into place. Tighten bolts by hand until
secured.
d)
Repeat the procedure for the cart left side
panel (B) assembly.
e)
Go back and tighten all bolts using the
screwdriver provided.
CC
M4X15 Bolt
4 PCS
GG
M4 Flat Washer
4 PCS
HH
M4 Spring Washer
4 PCS
