BBQ GSS3219B Скачать руководство пользователя

Страница: 11 / 24

GSS3219B
Owner’s Manual

Step 7 (Left side shelf assembly)

a) Pull out the drawer from the left side

shelf (H), then turn over it as shown.

b) String five hooks (J) with the side

bar tool hanger (I), then align the
holes on the end of side bar tool
hanger (I) with the holes on the left
side shelf.

c) Insert one M6 x 15mm bolt (BB) with

one M6 spring washer (FF) and one
M6 washer (EE) into each pre-drilled
hole. Tighten bolts by hand until
secured.

d) Go back and tighten all bolts using

the screwdriver provided.

Step 8 (Right side shelf assembly)

a) Turn over the right side shelf

(K).

b) String five hooks (J) with the

side bar tool hanger (I), then
align the holes on the end of
side bar tool hanger (I) with the
holes on the right side shelf.

c) Insert one M6 x 15mm bolt (BB)

with one M6 spring washer (FF)
and one M6 washer (EE) into
each pre-drilled hole. Tighten
bolts by hand until secured.

d) Go back and tighten all bolts

using the screwdriver provided.

M6X15 Bolt

2 PCS

M6 Spring Washer

2 PCS

M6 Flat Washer

2 PCS

M6X15 Bolt

2 PCS

M6 Spring Washer

2 PCS

M6 Flat Washer

2 PCS

Содержание GSS3219B

























Результаты поиска

Содержание GSS3219B

Отзывы:

Похожие инструкции для GSS3219B

Бренды по названию

Популярные бренды

BBQ GSS3219B, Руководство пользователя

Результаты поиска

Содержание GSS3219B

Отзывы:

Похожие инструкции для GSS3219B

Бренды по названию

Популярные бренды