GSC3219TN
Owner’s Manual
9
Step 6
a) Insert the bottom pin of
left door (L) into the
pre-drilled hole on the
cart bottom .
b) Push down the top pin of
left door
and insert it into
the pre-drilled hole on
the left end of front
beam.
c) Repeat the procedure for
the right door (M).
d) Close the two doors.
Step 5
a) Loosen the two pre-installed
bolts on the bracket (F) and
allow 1/4 bolt’s length to
extend from the bracket.
b)
Align the two holes on the left
side panel with the two bolts
extended from bracket.
c)
Push down the bracket until it
locks into place.
d) Align the two holes on the
bracket with the two holes on
the cart bottom.
e) Insert one bolt (EE) with one
spring washer (GG) and one
flat washer (FF) into each
pre-drilled hole. Tighten bolts
by hand until secure.
f) Go back and tighten all bolts
using the screwdriver
provided.
EE
M4×15 bolt
2 PCS
GG
M4 spring washer
2 PCS
FF
M4 flat washer
2 PCS
