BBQ Guru DynaQ, Руководство пользователя

Страница: 7 / 16

2. From the underside of the lower stand platform, press the rubber feet into the holes to prevent the stand
from sliding.
3. Snap the control onto the upper control bracket facing any direction.
4. Tilt the upper control bracket to the desired angle and tighten the thumb nut on the hex bolt to keep the
bracket in the selected position.
7.2 M
OUNTING TO THE
M
ONOLITH
G
RILL
NOTE : The additional bracket required to attach the control to the shelf is included only with the Monolith
Grill. This assembly requires the hex bolt, thumb nut and upper control bracket from the 5-in-1 magnetic mount
that was included with the control.
1. Attach the sheet metal mount to the left side shelf by placing the Phillips-head screw through the
existing hole on the bottom shelf rail and tighten the included nut to hold it in place.
2. Use the hex bolt and thumb nut from the 5-in-1 magnetic mount to attach the upper control bracket to
the sheet metal mount.
3. Snap the control onto the upper control bracket with the Q-tail pointing down diagonally to the right.
4. Tilt the upper control bracket to the desired angle and tighten the thumb nut on the hex bolt to keep the
bracket in the selected position.