WI-FI SETUP Screen
To access Wi-Fi Setup Screen, press
RIGHT button when arrow is on “SYSTEM
SETUP” line
For ease of use, we suggest setting up your
Wi-Fi link by following the instructions in the
“Connecting your CyberQ Cloud to your Wi-fi
Network” section.
The interface is much easier to use, and it can
be done from any PC or mobile device
equipped with a web browser.
***
After changing the Wi-Fi settings, the power
will have to be cycled (turned OFF/ON) to save
the settings.
If changing parameters from a Hot-Spot or
Wi-Fi connection, you can use the reboot
button at the bottom of the web page.
>WIFI SETUP
SCAN WIFI
EDIT: Hotspot
LOAD: Hotspot
192.168.101.10
GW: 192.168.101.001
NM: 255.255.255.000
DNS: 192.168.101.010
SSID: HS-MY_CYB
ENC: OPEN
KEY: **************
PORT: 80
SIGNAL:--
M: (MAC address)
MOD: 2.49.12
PAIRING DEVICES TO THE CYBERQ CLOUD IN HOT-SPOT MODE
The most basic way to use the CyberQ Cloud’s features is by directly pairing it with
one or more Wi-Fi devices in hot-spot mode.
1.
Apply power to the CyberQ Cloud. Will display for 5 sec.
2.
On a smart phone or tablet, go to
Settings > Wi-
Fi
.
Connect to
HS-MY_CYBERQ_####
3.
Once connected, the CyberQ Cloud will display:
4.
Open a browser window and type
192.168.101.10
This will load the CyberQ Cloud Controller pages.
From this browser window, you can monitor and control your cook and make
changes to the setup of the controller.
Networking Quick Start Guide
Before setting up the CyberQ Cloud, go to
www.sharemycook.com
and create an
account. Also see these instructions at:
www.youtube.com/watch?v=7Y2k60Rkmq8
1) Follow the steps to connect your smart phone or tablet to the CyberQ Cloud
under the
PAIRING DEVICES TO THE CYBERQ CLOUD IN HOT-SPOT MODE
section.
2) At the top of the page, click the link that says
WIFI SETUP
3) Click on the yellow button that says
Cloud Connection Wizard.
4) The CyberQ Cloud will scan for nearby WiFi routers. This can take up to 60
seconds. Scroll down to see the available networks. Find your home network and
click
Join
. If your WiFi router requires a password, type in the password and
click
Submit
.
