PROBES
The probes provided with your CyberQ Cloud are precision stainless steel ther-
mocouples,
rated for temperatures up to 500 degrees F
. and have a moisture
and smoke resistant stainless steel armor braid
.
Be careful not to kink these
wires or let them come in contact with flames.
IMPORTANT NOTE:
Be sure to fully insert your
probes into the control by
pushing the plug in until you feel and hear it snap in place. Failing to plug the
probes in securely, may cause sporadic temperature readings causing your
cooker to get excessively hot.
Prior to use, inspect the probe and cable for signs of heat or mechanical
damage. If a probe appears damaged, replace it with a back up and contact
BBQ Guru Customer Service.
POWER DRAFT BLOWERS (FANS)
The 10 CFM Pit Viper fan is suited to medium-sized grills and smokers, including
all ceramic grills and bullet-style smokers.
The 25 CFM Pit Bull fan is suited to offset smokers and larger cabinet smokers;
two fans can be used for large custom built and trailer-based models.
All blowers are equipped with an adjustable damper and an aluminum nozzle. This
feature allows the user to make fine adjustments on their own grill or smoker due
to natural drafts that effect cooking temperature.
Open the damper fully for quick start-up or grilling at high temperatures.
Close it half way for smaller cookers or low and slow cooking.
Close three-quarters of the way for cold smoking.
Close all the way to kill the fire.
MOUNTING
AND
SETUP
The CyberQ Cloud should be placed in a stable position with easy access to the
controls and protected from the elements. Connect the fan and probes before
connecting the power. Routinely inspect the unit, probes and wiring for damage.
Contact BBQ guru Customer service for repair or replacement.
CLEANING
UP / DOWN /
LEFT / RIGHT
ENTER
DISPLAY
POWER
INPUT
FAN
FOOD PROBE
INPUTS
PIT PROBE
INPUT
POWERING ON/OFF
Plug the power supply into the CyberQ Cloud and connect to a home wall outlet. The
CyberQ Cloud will automatically power on and display
:
If this is the first time powering
up will display for 5 sec.
If the CyberQ Cloud is already connected to your home Wi-Fi network,
will display for 5 seconds.
TURNING OFF
–
Press and hold the center button for 4 seconds.
You may also unplug the unit.
TURNING ON –
Press and hold the Center button for 2 seconds
If there is a power interruption at any time while cooking with your CyberQ Cloud the
unit will automatically restart once power is restored, and continue to control your grill/
smoker at the temperatures you originally set.
If you are operating in hot-spot mode, you may need to reset power to the CyberQ
HOT-SPOT PAIRING
192.168.101.10
CYBERQ CLOUD
CONTROL
v4.08
IP ADDRESS INFS
CONNECTING...
