bbluv BO137, Инструкция по эксплуатации

Страница: 6 / 24

EN
Kübe
POWER SUPPLY
You can use the Kübe with batteries (not included) or a cable (not included).
With batteries
1. Using an appropriate screwdriver, open the bottom cover
B
.
2. Install 3 AA batteries (not included) in the battery compartment
C
making
sure to match the indicated polarity.
3. Screw the bottom cover back into place
B
.
NOTE:If you do not intend to use the Kübe for a long period of time, remove the batteries.Keep batteries out of the reach of children.
With cable
Connect a micro-USB cable (not included) to the Micro-USB port
J
on the Kübe.
INSTRUCTIONS
1. Place one of the 3 discs on the projector.
2. Place the other 2 projector discs in the storage
spaces on both sides of the Kübe.
3. Power the Kübe with either 3 AA batteries
(not included) or a Micro-USB cable (not included).
4. Setup your preferred modes (listed below).
MODES
Projector mode
Press the Projection button
D
. The green, blue, and red LED
lights will alternate and project the images displayed on the
projection disc placed at the top
of the projector.
Lullaby mode
The Kübe has 10 melodies and 5 sounds preloaded. Press
the Music button
G
to activate the music or sound. To
change the melody or sound, press the Loop button
E
until
your desired tune plays.
ENGLISH
1
2