2.1.5
This LCD TV can store up to 100 channels and
enables to scan channels thought automatic,
manual and fine tuning scanning mode. Built-in
TV tuner supports stereo audio playback in
NICAM system.
(1) Adjusted channels selection
#Press +CH-buttons on the left panel or CH
buttons on the remote control each time, when
you want to change a channel.
#Use numeric buttons to enter the number of the
channel.
#Press button to return to the previous
channel.
(2) Default picture settings
selection
#You may select one of the default picture
settings:
USER, STANDARD, DYNAMIC and SOFT.
TV MODE
SELECT
RETURN
SETUP
ENTER
(1 )Switching interfaces
2.1.4 CONNECTION AND STARTING
(4 )Accompanying sound type
#
Only some of the TV channels have stereo
accompanying sound in NICAM system.
#Press NICAM button to select accompanying
sound.
(5 ) TV settings
#Press SETUP button to display the menu.
#Use cursor buttons on the remote control or
+CH-buttons on the left panel to select the item.
Use buttons to adjust selected parameter.
Use OK button for confirmation. Press SETUP
button again to return to the main menu or to
exit TV SETUP.
(6) Picture
#select PICTURE item to adjust picture
parameters.
#You may adjust BRIGHTNESS, CONTRAST,
SATURATION, TINT, SHARPNESS and COLOR
TEMP.
#You may adjust necessary parameters in the
device menu.
#Turn to Picture item on this page for details.
(3) Default sound settings
selection
#You may select one of the default sound
settings:
USER, MUSIC, FILM and NEWS.
#You may adjust necessary parameters in the
device menu.
#Turn to page.13 for details.
- 7 -
5
5
2
2
3
3
4
4
1
1
RF input
Meant for antenna connection.
COAXIAL OUT
Meant for multi-channel sound playback.
SCART socket
Meant for external audio video signal
source connection. There is no need to
use additional audiocord.
Y Cb(Pb) Cr(Pr)
AUDIO VIDEO IN
Used for external signal source
connection.