ENGLISH (US)
Page 20 of 28
OTH-SEM250-0356 Rev D
2.
Select the “Test DB Connection” button and verify that a dialog box is displayed that
says: “Connection was successfully established”
3.
Select “Next” to continue
4.
In the LDAP Info section, input the following information (some of which was
identified in the above steps):
a.
LDAP Server: <IP of LDAP server> (from Section 4.1)
b.
LDAP Port: <port of LDAP> (from Section 4.1)
c.
Database Name: sem250b
d.
Username: LDAP Administrator username
e.
Password
: Corresponding LDAP Administrator’s password
5.
Select the “Test LDAP Connection” button and verify that a dialog box is displayed
that says: “Connection was successfully established”
6.
Select “Next” to continue.
7.
Confirm the values and select “Finish” to proceed.
8.
Logout of the BBI Webserver Interface
10.4.
Assign roles
Log back in as an administrator of the BBI Webserver Interface
1.
Select the “LDAP Mapping” page and complete the following steps:
a.
With “Admin” selected in Local Roles, use the right-hand section to identify all
LDAP Roles to be granted BBI Admin functionality.
b.
Select “Save” to continue
c.
With “Clinical” selected in the Local Roles, use the right-hand section to identify
all LDAP Roles to be granted BBI Clinical functionality.
d.
Select “Save” to continue.
2.
Log out. Configuration is complete.
